JVC HR-J631T - Manual (Page 4)

4
INSTALLING YOUR NEW VCR
CHECK CONTENTS
1
Make sure the package contains all of the accessories
listed in “SPECIFICATIONS” (
੬
pg. 43).
SITUATE VCR
2
Place the VCR on a stable, horizontal surface.
CONNECT VCR TO TV
3
The connection method you use depends on the type of
TV you have.
RF Connection
● To Connect To A TV With NO AV Input Terminals . . .
a– Disconnect the TV antenna from the TV.
b– Connect the TV antenna cable to the ANT IN jack
on the rear of the VCR.
c– Connect the supplied RF cable between the RF
OUT jack on the rear of the VCR and the TV’s
antenna terminal.
AV Connection
● To Connect To A TV With AV Input Terminals . . .
a– Connect the antenna, VCR and TV as shown in
the illustration.
b– Connect an Audio/Video Cable between the AUDIO
OUT and VIDEO OUT jacks on the rear of the VCR
and the AV IN jacks on the TV.
CONNECT VCR TO
POWER SOURCE
4
Connect the power plug to an AC outlet.
NOTES:
● Even if your TV has AV input terminals, you must connect it
to the VCR using an RF cable in order to record one show
while watching another (
੬
pg. 25).
● For full identification of the VCR's rear panel, refer to the
Index (REAR VIEW
੬
pg. 44).
AC Power
Cord
Basic
Connections
Antenna or Cable
Coaxial Cable
Flat Feeder
Matching Transformer
Back of VCR
75 ohm terminal
AC
Outlet
ANTENNA-
IN (Antenna
or Cable
input)
RF
OUT
TV
Video Cable
(not supplied)
Audio Cable
(not supplied)
RF Cable
(supplied)