JVC HR-J580EK - Manual (Page 10)

three-step quick start 10
before you start
Check that the VCR is
turned off and no
cassette is inserted
Load the batteries into
the Remote Control
Refer to the Remote
Control diagram on
pages 6–7
Unless indicated
otherwise, use the
buttons on the Remote
Control
Check that the
connection is completed
Turn on the TV
– –:– – O
TV PR +
TV PR –
T V
– TV
+
TV
0000
STOP FIN
MENU OK
TV/VCR
DAILY/QTDN. VPS/PDC
AUX
?
WEEKLY/HEBDO
PROG 30 SEC
– –:– – AUDIO
1 2 3
4 6 5
7 8 9
0
DATE START
DEBUT PR
2
4
1
3
ENTER/ENTR EE
EXPRESS
Auto Setup
START AUTO SETUP
Press the o button. If ‘Auto’ appears on the display panel, press OK (or E).
what will happen?
The display panel on
the front of the VCR will show the word
‘Auto’. Do not press any button on the VCR or
the Remote Control.
note
If you have connected both the RF cable
and the fully-wired 21-pin SCART cable, and if
your TV offers T-V Link, etc., and the TV is
turned on, the VCR automatically performs
the Preset Download (
੬ pg. 12) even if you
select ‘Auto’ for Auto Setup function.
The VCR is automatically setting up the tuner channels and the video channel.
This only happens the first time that the VCR is turned on.
rf and sc art connection
If you have chosen
to connect the VCR to the TV with both the RF
Cable and a 21-pin SCART Cable (not provided)
and the TV set is in its AV mode (see the TV
manual), you will see the following information
displayed on your TV screen:
Three-Step Quick Start
For Step , be sure to perform either of the methods:
Auto Setup or Preset Download.
PR +
OK 3
ENTER/ENTR
EE
Auto Setup is running: don’t
touch any buttons
Your TV screen during Auto Setup if SCART is used
AUTO SET
PLEASE WAIT
[MENU]: EXIT
REVIEW
VCR