JVC HR-J580EK - Manual (Page 28)

basic features 28
– P1 –
[x]: DELETE [+/–] a k
[PROG]: EXIT
START STOP
SP
DATE
TV PROG
24.12 3
ITV
8:00 10:00
[1] a k
[PROG]: EXIT
1
2
3
4
5
6
7
8
START
8:00
10:00
11:30
9:00
STOP
10:00
10:45
13:00
10:00
CH
3
2
1
92
DATE
24.12
25.12
25.12
DAILY
Screen A
Screen B
Check, Cancel & Change Programmes
Press c, then press o to disengage the timer mode.
review the progr ammes
Press C. The TV screen will display
a list of the programmes set for timer recording (screen A).
Pressing C again will cycle through each of the entries in the
VCR’s memory (screen B).
c ancel a progr amme
Press x to cancel a programme.
change a progr amme
Use the START +/– , STOP +/– , DATE +/– ,
PR +/– and / buttons as necessary.
return to normal screen
Press C as many times as neces-
sary.
return to timer mode
If there are still programmes to be
recorded, press c.
When Programmes Overlap Each Other
If PROGRAM OVERLAPPED appears, you have another programme
overlapping the programme you have just made.
confirm overlapping programmes
The Program Check screen
appears and conflicting programmes will start blinking.
Example: Programme 1 (you have just made) and Programme 4
overlap each other.
select programme to modify Press the A and B
buttons, then press OK (or E). You can only select one of the
overlapping programmes.
note If you do not mind this overlap, press PROG to finish the
timer programme setting. The programme with the lower
programme number will be recorded and the other one will not be
recorded correctly. Without doing anything for about 1 minutes, the
VCR will finish the timer programming.
c ancel a progr amme Press x to cancel a programme when the
Program screen you do not want is shown.
change a progr amme
Use the START +/– , STOP +/– , DATE +/– ,
PR +/– and / buttons as necessary, then press OK .
PROGRAM COMPLETED appears on the screen for about 5 seconds, then normal screen appears.
note
If the overlap is not yet solved or another overlap occurs with the timer programme setting
made last after making correction on a programme, the conflicting programmes will be shown on
the Program Check screen again. Repeat the above steps again until the overlap is solved.
– P1 –
[ ]: NEXT
START STOP
SP
DATE
TV PROG
8:00 10:00
24.12 3
ITV
[ ]: NEXT
1
2
3
4
5
6
7
8
START
8:00
10:00
11:30
STOP
10:00
10:45
13:00 CH
3
2
1
DATE
24.12
25.12
25.12