Power save mode, Auto sp a lp timer, Advanced features 39 – JVC HR-J580EK User Manual
Page 39
advanced features
39
Power Save Mode
You can reduce the power consumption while the VCR is turned off.
get to the mode set screen
Press m. Move the highlight
bar to
MODE SET
using the A and B buttons and press
O
(or E).
select power save mode
Move the highlight bar to
POWER
SAVE
using the A and B buttons. Press O (or E) to
select
ON
or
OFF
.
return to normal screen
Press m.
NOTES:
• During Power Save, the display panel will be turned off.
• While the VCR is in the Power Save mode, the picture may be distorted momentarily when
you turn on/off the VCR.
• Power Save does not work when ...
... the VCR is in the Timer mode.
... the VCR’s power is turned off after timer-recording (or Instant Timer Recording).
Auto SP a LP Timer
When timer recording in
SP
mode, if the VCR calculates that there isn’t enough tape to record
the complete programme, it will automatically switch from
SP
to
LP
mode.
get to the mode set screen
Press m. Move the highlight
bar to
MODE SET
using the A and B buttons and press
O
(or E).
enable/disable auto sp
alp timer
Select
AUTO SPaLP
TIMER
using the A and B buttons and press O (or
E
) to toggle between
ON
and
OFF
.
return to normal screen
Press m.
[1] a k
[MENU]: EXIT
MODE SET
B.E.S.T.
ON
PICTURE CONTROL
AUTO
AUTO TIMER
OFF
O.S.D.
ON
DIRECT REC
ON
AUTO SP a LP TIMER
OFF
POWER SAVE
ON
F
[1] a k
[MENU]: EXIT
MODE SET
B.E.S.T.
ON
PICTURE CONTROL
AUTO
AUTO TIMER
OFF
O.S.D.
ON
DIRECT REC
ON
AUTO SP a LP TIMER
ON
POWER SAVE
ON
F