JVC KY-F75 - Manual (Page 28)

E24
Opening and closing the Settings screen
The various camera settings are performed on the computer screen using the [KY-LINK] appli-
cation software. The settings valid when the [KY-LINK] is closed are automatically recalled and
set in the camera the next time the system is started up.
Procedure
1.
Turn ON the KY-F75 and wait for 5 seconds or more.
2.
Start up the [KY-LINK] application software. (
੬ page E21)
3.
Open the Settings screen.
● The Settings screen is displayed by clicking the [Show Control Window] button in the KY-
LINK screen.
4. Settings
Settings screen
Categories selection tab
The Settings screen consists of 6 different cat-
egories of setting screens.
● Exposure: Used for image level related set-
tings such as Iris, Shutter, Gain, etc.
● White balance: Used for settings of color tem-
perature, white balance, etc.
● Process: Used for image quality related set-
tings such as detail compensation, gamma,
white spot compensation, etc.
● Color matrix: Used for settings related to
color tone.
● Lens: Used for setting of the method for con-
trol of the lens iris.
● System: Used for setting the method for re-
leasing the freeze mode, setting the test
pattern level, and for settings related to
memorization of the setting values.
4.
Selecting the Setting screen
● Click the selection tab corresponding to the category to be set.
The selected Settings screen appears.
[Show Control window] button