JVC KY-F75 - Manual (Page 39)

E35
Process settings screen
This screen is used to make settings related to the picture quality, such as detail compensation,
gamma, and white spot compensation.
Detail settings
Gamma
settings
Flare setting
DSP bypass setting
ABL setting
Nega setting
Noise sup. setting
Pixel comp setting
(White spot
compensation)
Pixel check button
Click when White spot detection
should be performed.
(When Pixel comp is ON)
Master black
setting
MEMO
The setting value is the value to be set for the input signal
level before GAMMA compensation.
Contents
Used to set whether to emphasize details.
ON:
changes the detail emphasis
OFF: no detail emphasis
The emphasis level of the detail is adjusted when [Dedail]
is set to ON.
increase the number:
Sharpen the detail
decease the number: Soften the detail
Adjusted when you want to reduce noise in black areas.
Noise in black areas is reduced because the frequency
characteristics of areas where the image signal level falls
below this set value are lowered. However, fine details in
areas falling below the set value will be lost.
Set Value
OFF
[ON]
– 7
– 6
•
[0]
7
[0.0%]
0.5%
:
28.0%
28.5%
(0.5% step)
Item
Detail
Level
When “ON” is
selected.
Level dep.
[ ] indicates the factory setting