Jwin JT-P433 - Manual (Page 13)

Vintage Design Telephone with Caller ID V10M10_IM_EN_01282008
www.jWIN.com - 12 -
OPERATIONAL INSTRUCTIONS
Recieving Caller ID Information
Note: You must make sure your Telephone Company offer caller ID service so that
the caller ID function can be activated.
A. Incoming Call Display
When there is an incoming call, the LCD will display the number, area code, name,
time and date of the call.
B. Please note the following indicator:
“UNAVAILABLE”
The call is made through a telephone company, which does not offer Caller ID
service or does not transfer calls by long distance net
“BLOCKED CALL”
Some areas allow the option for callers to prevent the telephone data from being
displayed on others’ telephone. If you received such a call, “BLOCKED CALL” will be
shown on LCD
“Message Icon”
If you apply message service to your telephone company, LCD will display Message
icon of post box when there is a message left. When you read this message, the
message icon will disappear.
Reviewing the Caller ID List
- Press ▲ UP or ▼DOWN to review the incoming calls (at most 80 calls)
Erasing Data From the Caller ID List
- Under on-hook or off-hook state, press ▲UP or ▼DOWN to select the
wanted number, press the DEL button twice to erase the number.
- Under on-hook or off-hook state, if press the DEL button continuously
more than three seconds and the entire Caller ID list will be erased.
Calling Back a Number from the Caller ID List
- Under on-hook state, press ▲UP or ▼DOWN to select the wanted
number
- Press the SET/BACK button and the LCD will display “PICKUP OR ADJ”
(if the incoming number is 10 digits) or “PICKUP PHONE” (if the incoming
number is 7 or 11 digits)
- Press the SET/BACK button to adjust showing 7, 10 or 11 digits
- Pick the handset or press the SPEAKER button to dial out the number
automatically.
- Under off-hook state, if area code was set, press ▲UP or ▼DOWN to
select the desired number
- Press the SET/BACK button, if the displaying number is 10 digits, the
number will be dialed out automatically with adding “1” as first digit. If the
displaying number is 7 or 11 digits, the number will be dialed out
automatically.