Operational instructions, Phonebook review, Phonebook input – Jwin JT-P433 User Manual
Page 14: Phonebook delete or edit, Set auto ip on/off
Vintage Design Telephone with Caller ID V10M10_IM_EN_01282008
www.jWIN.com
- 13 -
OPERATIONAL INSTRUCTIONS
Phonebook Review
-
Under on-hook or off-hook state, press the BOOK button to enter the
phonebook review
-
When the LCD displays “SEARCH”, press ▲UP or ▼DOWN to review the
phonebook number or
-
Enter the letter of the name by using keypad, the wanted telephone
number will display on LCD, press ▲UP or ▼DOWN to review one by one
-
Press [FLASH] to exit the phonebook review
Phonebook Input
-
Press [BOOK] twice continuously, the LCD will display “EDIT”
- Press
▲
UP or ▼DOWN and the LCD will display “PLS INPUT NUMBER”.
-
Input the desired directly by using keypad.
- Press
the
BOOK button to confirm
-
Then the LCD will display “PLS INPUT NAME”, use the key pad to enter
the name (at most 16 letters) and use the DEL button to correct (For
example: enter “C”, just continuously press [2] key three times )
- Press
the
BOOK button to confirm
-
Repeat the steps to input another name and number
-
When “MEMEORY FULL” displays on the LCD, it means the phonebook
memory is full, no more new name and number can be input
- Press
the
DEL button to exit the phonebook input
Phonebook Delete or Edit
-
When reviewing the phonebook record, press the DEL button twice to
erase the record.
-
When reviewing the phonebook record, press the BOOK button to enter
edit
-
The LCD will display “EDIT”, press ▲UP or ▼DOWN and the LCD will
display “PLS INPUT NUMBER”.
-
Input the desired directly by using keypad.
- Press
the
BOOK button to confirm
-
Then the LCD will display “PLS INPUT NAME”, use the key pad to enter
the name (at most 16 letters) and use the DEL button to correct (For
example: enter “C”, just continuously press [2] key three times )
- Press
the
BOOK button to confirm
Set Auto IP On/Off
-
Under off-hook state, press ▲UP for three (3) seconds to set IP On or Off.
(IP number must be set in advance).
-
For example, if the IP number is 234567 and the long distance code is 1,
press ▲UP for three seconds to set IP ‘On’ and the LCD will display
“234567-1”
- Press
▲UP for three seconds again to set IP ‘Off’