Anual burner lighting on any burners, Eighting, Ar burner l – Jackson 700 Series User Manual

Page 15: Ottom (main) infrared burner lighting, Perating the rear burner o, Main burner lighting

Advertising
background image

MAIN BURNER LIGHTING


To light the Main Burners start with any burner. Turn the Control Knob to the left and it will spark the igniter a
you turn the control knob. Once this burner has lit, simply repeat this step for the remaining burners. Th

s

e

rocess is the same .

. If the burner does not immediately light, turn the valve to OFF. Wait 5 minutes then repeat lighting

of the grill and may damage the unit.

. NEVER RUN BOTT

p

1. Always open the lid when lighting the burners.

2

procedures.


3. NOTE: Do NOT run all burners at the same time with the lid closed. Doing this will result in overheating


4

OM INFRARED BURNER AND REAR INFRARED BURNER AT

THE SAME TIME!!

ANUAL BURNER LIGHTING ON ANY BURNERS


M

ee

ervice if your grill igniter is not functioning.

.

oking grates and the flame tamers that are over each burner.

.

rn the burner you are lighting to high / light and place a long match near the side gas ports of the

er.

.

mediately light, turn the valve to OFF. Wait 5 minutes then repeat lighting

E

IGHTING


S

your local dealer for s

Remove the co


1

2

Tu
burn


3

If the burner does not im
procedures.

AR BURNER L

R

.
.

r Rotisserie infrared burner turn the Control Knob to the left and it will spark the igniter as

you turn the control knob. The Infrared Burner will light at first with a blue flame. It takes approximately 5
minutes for the burner to start to GLOW red.

OTTOM (MAIN) INFRARED BURNER LIGHTING


1
1

To light the Rea

B

. To light the Bottom Infrared Burner turn the Control Knob to the left and it will spark the igniter as you turn

the control knob. The Infrared Burner will light at first with a blue flame. It takes approximately 5 minutes
for the burner to start to GLOW red.


2


perating The Rear Burner

O


When operating the Rear Burner please ensure that the Warming Rack is

. The Warming Rack will

REMOVED

ecome damaged if NOT

r is in use.

The rear burner is specially designed to be used with the Rotisserie Kit, and should ONLY be used when
using the Rotisserie Kit.


b

removed while the Rear Infrared Burne

15

Advertising