GE 24927 GE Universal Remote - Manual (Page 14)

13
OPERATING THE AM/FM TUNER
1. Press the AUDIO button.
2. Press the TUNER (3) button.
3. Press the AM/FM button to toggle
between AM and FM.
4. Use the Preset (CHAN+/CHAN-) buttons
to move up and down channel presets.
OPERATING A HOME THEATER SUR-
ROUND SOUND SYSTEM
With GE receivers, a second press of the TV
button should turn the receiver on.
1. Turn the TV on.
2. Press the AUDIO button
3. Select the audio input either by using the
labeled number buttons or the
FUNCTION button.
4. Press the VOL+ or VOL- buttons to control
volume.
NOTE: The Volume buttons may operate both
TV and receiver volume at the same time.
If this presents a problem, it may be resolved
by disabling the TV speakers by going into the
TV menu.
CONTROLLING THE SURROUND SOUND
FEATURE
The Surround Sound feature may be turned
ON/OFF by pressing the SURR ON•OFF but-
ton.
1. Press the SURR MODE button until the
desired mode is found.
2. Press DELAY+ or DELAY- to achieve the
desired delay effect.
3. Press the DSP ON•OFF button to turn DSP
(Digital Sound Processor) ON or OFF.
4. Press the DSP Button until the desired effect
is achieved.
5. Press the TEST button to listen to speaker
levels.
6. Press FRONT, CENTER, or REAR buttons to
select speakers.
7. Press the LEVEL+ or LEVEL- buttons to
adjust speaker levels.
24927 Revised Size 7" x 2 3/4" 8/19/03 9:10 AM Page 14