GE 24927 GE Universal Remote - Manual (Page 18)

SOLUTION
A) Replace the batter-
ies with 2 new AAA
alkaline batteries.
B) Check if batteries
are properly installed.
A) Try all the codes
listed for your brand.
B) Try the Code
Search method.
Start Code Search
over again to locate
properlythe proper
code for full compati-
bility
Try the VCR code for
your brand. Some
combo units, howev-
er, may require both a
TV and VCR code for
full operation.
As a safety feature on
your remote, you
must press the REC
button twice.
If your original
remote required
ENTER after a chan-
nel, press ENTER
after you select a
channel.
A) Make sure you
have new batteries
and you are aiming
your remote at your
device.
B) Check that batter-
ies are properly
installed.
Trouble Shooting
PROBLEM
Red light not blink-
ing when you press
any key.
The remote does not
operate your video
devices.
Not performing com-
mands properly
Problems program-
ming a TV/VCR
Combo Unit
VCR not responding
Problems changing
channels
No response after
pressing a key
17
24927 Revised Size 7" x 2 3/4" 8/19/03 9:10 AM Page 18