JVC TM-2100PN - Manual (Page 12)

10
<SET–UP MENU> RESET
Are you sure ?
“Yes” then <CONTRAST>
“No” then <+> or <–>
Functions (Items)
Initialisation
(setting)
SHARPNESS 00
COLOR TEMP. 6500
COLOR SYSTEM AUTO
ASPECT RATIO 4–3
BRIGHTNESS P.S. OFF
H. POSITION 00
V. POSITION 00
WHITE BALANCE
R. CUT OFF
00
G. CUT OFF 00
B. CUT OFF 00
R. DRIVE 00
G. DRIVE 00
B. DRIVE 00
CONTROL LOCK OFF
B.P.S. LEVEL 10
REMOTE SELECT OFF
PHASE 00
CHROMA 00
CONTRAST 00
BRIGHT 00
VOLUME 20
Sorts
<MENU> screen
<SET
-UP
MENU> screen
Picture adjustment
V
olume
HOW TO INITIALISE THE
SETTING
SCREEN DISPLAY AND SELECTIONS IN THE
<SET-UP MENU> RESET MODE
You can set <MENU> and <SET-UP MENU> screen items, picture adjustment items and
the volume level to their factory-set (initial) values.
1. Press the Power ( ) Switch to turn the power
OFF (
—
).
The <SET-UP MENU> RESET screen is displayed.
PHASE MENU
POWER
_ON
—OFF
Initial settings
<SET-UP MENU> RESET screen
2. While pressing both MENU button and PHASE ( )
button, press the Power ( ) switch to turn the power
ON (
_
).
3. Setting
ⅷ Initialisation is required.
ⅷ Initialisation is not required.
Press the CONTRAST ( ) button.
* Initialisation is completed, and the <SET-UP MENU>
RESET screen disappears.
Press the VOLUME/SELECT [+] or [–] button.
* Initialisation is aborted, and the <SET-UP MENU>
RESET screen disappears.
CONTRAST
● The <SET-UP MENU> PRESET screen will not be
displayed if the MENU or PHASE buttons are pressed
for a very short time. Keep pressing them until the
display screen appears.
Note:
VOLUME/SELECT
– +
POWER
ON
OFF
LCT0053-002A-H (EN) 02.07.30, 2:46 PM 10