Basic connection example, English – JVC TM-2100PN User Manual

Page 13

Advertising
background image

ENGLISH

11

Video Monitor

TM-2100PN

<second one>

VCR

REMOTE

(Remote cable)

VCR

Video Monitor

Video Camera

(Audio signal cable)

Audio

Video

(Video signal cable)

: Signal Flow

Audio

Video

(Video signal cable)

(Audio signal cable)

REMOTE

(Remote cable)

OUT

IN

A

B

VIDEO

A

B

AUDIO

REMOTE

OUT

IN

OUT

IN

OUT

IN

IN

OUT

Y/ C

OUT

IN

TM-2100PN

PHASE

CHROMA

BRIGHT CONTRAST

MENU

INPUT SELECT

VOLUME/SELECT

+

B

A

POWER

_ON

—OFF

Y/ C

VIDEO

VIDEO

BASIC CONNECTION EXAMPLE

External control switch

Open circuit

Short circuit

(open)

(short)

ASPECT RATIO

4–3 (4:3)

16–9 (16:9)

BRIGHTNESS P.S.

OFF

ON

Notes:

• Before connecting your system, make sure that all units are turned off.
• The illustration below shows some examples of different connections. Terminal connections may differ depending on the

component connected. Be sure to refer to the instructions provided with the unit(s) you are connecting.

• Each pair of input (IN) and output (OUT) terminals are bridge-connected.
• If you’re not connecting any equipment to a bridged output (OUT) terminal, be sure not to connect any other cables to the

bridged output (OUT) terminal as this will cause the terminating resistance switch to open (auto terminate function).

• When making a bridge connection, connect the input (IN) and output (OUT) terminals on the monitor to separate video

components.
(For example, if both terminals are connected to the same VCR, resonance may occur except during playback. This is caused by
the same video signal “looping” between the VCRs, and is not a malfunction.)

• Select the video input (Input A (VIDEO), Input B (Y/C) or Input B (VIDEO)) with the INPUT SELECT button on the front panel.
• The ASPECT RATIO or BRIGHTNESS P.S. function can be controlled via the REMOTE terminal. To do this, set REMOTE

SELECT in the <SET-UP MENU> mode. (Refer to pages 8 and 9.)

VIDEO A Connection Example

(Select Input A (VIDEO) button)

External control
functions

External control switch

short circuit (short)

open circuit (open)

RCA pin

LCT0053-002A-H (EN)

02.07.30, 2:46 PM

11

Advertising