Jensen JCR-255 - Manual (Page 13)

BACKLIGHT BRIGHTNESS OPERATION
You can change the LED brightness by switching the HI / LO dimmer
switch located on the side of the cabinet.
AUXILIARY INPUT
This unit features an AUX line-in jack for connecting your iPod, MP3
player or other digital music players.
1. Connect the headphone jack of your external device to the AUX
IN jack located on the back of the unit (cable not included).
2. Turn on the unit and set the FUNCTION Selector to the “AUX IN”
position.
3. Start playing your iPod, MP3 player or other external audio device.
4. Slowly adjust both volume controls on the unit and the external
device.
5. Turn off your iPod, MP3 player etc. when finish listening.
6. Turn the unit off and unplug the AUX Line-in jack.
CARE AND MAINTENANCE
1. If the cabinet becomes dusty, wipe the exterior with a soft dust cloth
only. Never use dusting sprays or polishes on the cabinet.
2. If the cabinet becomes dirty or smudged with fingerprints it may be
wiped with a soft cloth that has been slightly dampened with a mild soap
and water solution.
3. Always disconnect the power cord from the AC outlet before cleaning.
Never allow any liquid to get inside the cabinet.
NOTE
1. If there are no batteries in the battery back-up compartment, the Auto
Set Time and Alarm settings will be lost when the AC power cord is
disconnected for cleaning. You will need to reset the clock and
alarm time(s) after reconnecting the AC power cord. Follow the
“SETTING THE CLOCK” section above if needed.
2. lf “AtS” is shown on the display during normal operation, please press
the power ON/OFF button once to return to normal operation.
12