Documentation feedback – Juniper Networks T1600 User Manual
Page 54
Table 12: Additional Books Available Through http://www.juniper.net/books
Description
Book
Provides background and in-depth analysis of multicast routing using Protocol Independent
Multicast sparse mode (PIM SM) and Multicast Source Discovery Protocol (MSDP); details
any-source and source-specific multicast delivery models; explores multiprotocol BGP (MBGP)
and multicast IS-IS; explains Internet Gateway Management Protocol (IGMP) versions 1, 2, and
3; lists packet formats for IGMP, PIM, and MSDP; and provides a complete glossary of multicast
terms.
Interdomain Multicast
Routing
Provides detailed examples of common JUNOS software configuration tasks, such as basic router
configuration and file management, security and access control, logging, routing policy, firewalls,
routing protocols, MPLS, and VPNs.
JUNOS Cookbook
Provides an overview of Multiprotocol Label Switching (MPLS) applications (such as Layer 3
virtual private networks [VPNs], Layer 2 VPNs, virtual private LAN service [VPLS], and
pseudowires), explains how to apply MPLS, examines the scaling requirements of equipment
at different points in the network, and covers the following topics: point-to-multipoint label
switched paths (LSPs), DiffServ-aware traffic engineering, class of service, interdomain traffic
engineering, path computation, route target filtering, multicast support for Layer 3 VPNs, and
management and troubleshooting of MPLS networks.
MPLS-Enabled Applications
Explores the full range of characteristics and capabilities for the two major link-state routing
protocols: Open Shortest Path First (OSPF) and IS-IS. Explains architecture, packet types, and
addressing; demonstrates how to improve scalability; shows how to design large-scale networks
for maximum security and reliability; details protocol extensions for MPLS-based traffic
engineering, IPv6, and multitopology routing; and covers troubleshooting for OSPF and IS-IS
networks.
OSPF and IS-IS: Choosing an
IGP for Large-Scale Networks
Provides a brief history of the Internet, explains IP addressing and routing (Routing Information
Protocol [RIP], OSPF, IS-IS, and Border Gateway Protocol [BGP]), explores ISP peering and
routing policies, and displays configurations for both Juniper Networks and other vendors'
routers.
Routing Policy and Protocols
for Multivendor IP Networks
Provides the insight and practical solutions necessary to understand the IS-IS protocol and how
it works by using a multivendor, real-world approach.
The Complete IS-IS Protocol
Documentation Feedback
We encourage you to provide feedback, comments, and suggestions so that we can
improve the documentation. You can send your comments to
, or fill out the documentation feedback form at
. If you are using e-mail, be sure
to include the following information with your comments:
■
Document name
■
Document part number
■
Page number
■
Software release version (not required for Network Operations Guides [NOGs])
54
■
Documentation Feedback
T1600 Routing Node Upgrade Guide