Basic operation, White balance adjustment, 1white balance adjustment (auto) – JVC DZ-VCA1SE User Manual

Page 22: 2white balance adjustment (manual), 3white balance adjustment (preset), With the [r] volume control and the p

Advertising
background image

22

Basic operation

White balance adjustment

While referring to the monitor, shoot a white subject
(such as a wall or sheet of paper) in full screen under
the same lighting conditions as those that will exist
during the actual shoot.

1

White balance adjustment (auto)

Set the WHITE BALANCE switch to [AUTO].
Hold the [SET] switch to the right. [AUTO WHITE] will
blink in the upper left corner of the monitor screen.
When white balance adjustment is complete, this
indication changes to [AUTO WHITE OK].
For further fine adjustment, use the [ADJ R]/[ADJ B]
volume controls for FINE ADJ.

If the indication in the upper left corner of the
monitor screen does not change to [AUTO WHITE
OK], white balance has not been completely ad-
justed.
Check the following points, then retry auto white
balance adjustment.
1. Is the light insufficient?

Adjust the lighting.

2. Did you shoot a coloured subject?

Shoot a white subject.

2

White balance adjustment (manual)

Connect a measuring instrument such as a waveform
monitor to the video signal output jacks and adjust the
white balance while watching the waveform.
First, set the WHITE BALANCE switch to [MANUAL].
Adjust the P

B

, P

R

output amplitudes to the minimum with

the [R]/[B] volume controls.
Adjust the P

R

with the [R] volume control and the P

B

with

the [B] volume control.

If a measuring instrument is not available, adjust the
picture on the monitor screen until it is white. In this
case, high-precision white balance cannot be
obtained.

3

White balance adjustment (preset)

Set the WHITE BALANCE switch to [PRESET].
When a halogen lamp is used as a light source, check
the MENU-PAGE 1's [PRESET W.B.] menu, and set the
[3200K/5600K] switch to 3200K. If a light source similar
to sunlight is used, set this switch to 5600K.
For further fine adjustment, use the [ADJ R]/[ADJ B]
volume controls for FINE ADJ.

FINE ADJ.

R

B

WHITE BALANCE

SET.

R

AUTO

PRESET

MANUAL

B

3200K

5600K

FINE ADJ.

R

B

WHITE BALANCE

SET.

R

AUTO

PRESET

MANUAL

B

3200K

5600K

FINE ADJ.

R

B

WHITE BALANCE

SET.

R

AUTO

PRESET

MANUAL

B

3200K

5600K

SET switch

WHITE BALANCE switch

WHITE BALANCE switch

WHITE BALANCE switch

R/B volume control

ADJ R/ADJ B volume controls

3200K/5600K switch

Advertising