JVC RK-C42WBT3 - Manual (Page 12)

12
Brace the plasma display while connecting the power cord or system cables, as the display may
tip over, causing injury.
5. Connect the power cable and system cables to the plasma display.
Be careful not to let the cables become caught between the plasma display and the Wall Mounting Unit.
Caution
<Instructions for Assembly, cont’d>
6. Fix the Plasma Display to the Wall Mounting Unit.
Push the bottom of the plasma display toward the Wall Mounting Unit to securely fasten the display to the Wall
Mounting Unit. Then, fasten the Rotation Shaft Screw Component at the bottom left/right of the Wall Mounting
Unit with the Rotation Shaft Screws and the Spacer Rings.
This task must be performed by at least two persons.
Rotation Shaft Screw
Spacer Ring
Rotation Shaft Screw
Spacer Ring
Rotation Shaft Screw