JVC RK-C42WBT3 - Manual (Page 4)

4
Frame Fastening Screws left/right
(Spacer Ring + Flat Washer + Spring Washer)
Frame Rotation Shaft
Screws (left/right)
Spacer Rings (left/right)
Frame Attachment Lever Screws
Angle Adjustment Lever
Frame
Rotation Jaw
Plasma Display
w
q
e
X 10
r
Angle Adjustment
Lever Lock Screw
Caution
● Consult authorized service personnel for electrical work. Using power cords damaged during
installation (i.e., exposed or severed wiring) may result in fire or electric shock.
● Conduct the work with adequate working space. Damage or bodily injury may result from
working under unsuitable conditions.
● Avoid mounting this unit in areas where there is electrical wiring or water pipes, as fire or
electric shock may result.
<Names of Parts>
<Components List>
q
Frame ................................................................... 1
w
Wall Mounting Unit ............................................... 1
Tools Required for Assembly:
1. Type 2 Philips Screwdriver (+)
2. Type 2 Philips Screwdriver (+) with 300mm (approx. 12-inch) or longer shaft
Parts bag
contains:
e
Screw (M5 X 30) .......................... 10
r Screw (M5 X 20) ............................ 1