Warning, Mounting the wall unit – JVC RK-C42WBT3 User Manual

Page 3

Advertising
background image

3

Warning

Mounting the Wall Unit

The Wall Mounting Unit should be mounted to a wall that can adequately

hold the total weight of the plasma display and the Wall Mounting Unit

over a long period of time and which can adequately withstand

earthquakes, conceivable vibrations, and other external forces.

Improper installation may cause the plasma display to fall down, resulting

in physical injury.

Mounting On Wooden Walls

The weight of the unit should be borne by the wall posts or studs, and

these should be reinforced if insufficiently strong. Do not install the Wall

Mounting Unit on walls made of plasterboard or thin plywood. Use the

commercially sold screws best suited for the wall structure and material.

Mounting On Concrete Walls

Use commercially sold wall anchors capable of supporting the weight of

the plasma display.

Do not install the Wall

Mounting Unit in a

location which is hot or

humid or which may

become wet, as the

presence of excessive

moisture may lead to

fire or electric shock.

Do not install the Wall

Mounting Unit near the

blower or air inlet of an air

conditioner.

Do not install the unit in a

location with a large

amount of dust, soot, or

cigarette smoke, as this

may lead to fire.

Do not block the

ventilation holes, and be

sure to leave sufficient

space around the unit

for ventilation.

Inadequate ventilation may

cause the unit interior to

overheat, leading to fire.

Plasterboard/Thin Plywood

Do not install the Wall

Mounting Unit in a

location subject to

frequent vibration, impact

or other external forces.

The unit may fall down or

be damaged, causing

physical injury.

Do not install the unit in a

location where people

may hang on it or lean

against it.

Doing so may cause the

unit to fall down or be

d a m a g e d , r e s u l t i n g i n

injury.

Do not install the unit in

a location exposed to

direct sunlight or strong

light, as viewing the

plasma display in an

overly bright

environment can be

tiring for the eyes.

Do not install the Wall

Mounting Unit on a

non-vertical wall.

The unit interior may

overheat, resulting in fire,

or the unit may fall down,

causing physical injury.

At least
15 cm

At least
20 cm

Advertising