JobSite Systems LSO-7 - Manual (Page 5)

PACKAGE CONTENTS
■ Indoor/Outdoor speakers x 2
■ Mounting brackets x 2
■ Paint masks x 2
PREPARING FOR
INSTALLATION
If you are mounting the speakers onto
an existing indoor wall, take time to
consider any possible obstructions,
which may be hidden inside the wall:
studs, electrical wiring, telephone
wiring, plumbing, AC or heating conduit
and ductwork.
If you are mounting the speaker’s
outdoors, use hardware designed for
outdoor use.
Mount the speakers in a location that
provides the best sound coverage and
minimizes the speaker’s exposure to
the elements.
Label the speaker wires at the amplifier
location.
Consider the amount of Bass you
would like to have. If you need a
average amount of Bass, then place
your loudspeakers as shown in
Figure 3. If you prefer more Bass,
place your loudspeakers as shown in
Figure 2.
TOOLS REQUIRED
■ Stud Locator
■ Cordless screwdriver
■ Three screws or bolts suitable
for the mounting surface
■ Pencil
■ Wire stripper
■ Wire labels
3
Figure 2
Placement for enhanced bass output
Figure 3
Placement for average bass output
DS00386ATW_LSO-5_6_7_8.qxp 11/18/04 7:22 PM Page 3