John Lewis JLBIOS609 - Manual (Page 23)

23
Button lock
This function is used to ensure that oven func-
tions set are not accidentally altered.
Activating the button lock
1. If necessary, switch on the appliance using
the On/Off .
2. Select the oven function.
3. Press and hold the Time functions and
buttons at the same time, until “LOC” ap-
pears in the display.
The button lock is now engaged.
Cancelling the button lock
Press and hold the Time functions and but-
tons at the same time, until “LOC” disappears
from the display.
The button lock is automatically lifted when
the oven function is switched off.
3
Heat+Hold
The Heat+Hold function keeps your prepared
dish warm for 30 minutes, after the baking or
roasting process is completed.
This is helpful, for example, if your guests are
late.
Pre-condition for Heat+Hold:
• Set temperature is above 80°C
Switching on Heat+Hold
1. Set clock functions Cooking duration
and/or End of cooking .
2. Press the Time functions button repeatedly
until the symbol Keep warm appears in
the display.
3. Press the button. “00:30:” appears in the
display.
4. As soon as the oven function is completed,
a signal sounds and Heat+Hold starts.
The oven function set runs at 80°C for 30
minutes.
As soon as the 30 minutes with Heat+Hold
has elapsed, the oven switches itself off.
3
Irrespective of an oven function
being set, Heat+Hold remains ac-
tive. You can change between the
oven functions.