JVC HDTV Encoder DM-JV600U - Manual (Page 14)

14
Configuration Menu (continued)
Item Setting value Content
Initial Param
Menu
PSI Enable
PAT TS ID
PMT PID
PCR PID
Video PID
Audio PID
Video Stream ID
ON ⅷ
OFF
0001
to
0001 ⅷ
to
FFFF
0010
to
0010 ⅷ
to
1FFE
0010
to
0101 ⅷ
to
1FFE
0020
to
0102 ⅷ
to
1FFE
0020
to
0103 ⅷ
to
1FFE
E0
to
E0 ⅷ
to
EF
Set the PSI (Program Specific Information) to ON/
OFF.
ON : PAT and PMT will be output.
OFF : PAT and PMT will not be output.
Set the ID of PAT TS.
PAT TS ID is the Transport Stream ID within PAT.
PAT (Program Association Table) is the correspondences
table of Program number and PMT PID.
Set the PMT Packet ID.
PMT (Program Map Table) is an index table that
designates the various stream PIDs which
constituted the program.
Set the PCR Packet ID.
PCR (Program Clock Reference) is clock data that is
output periodically.
It is used by the decoder to synchronize with internal
clock for PLL synchronization.
Set the Video Packet ID.
Set the Audio Packet ID.
Set the ID of Video PES stream.
ⅷ : Default setting
Menu Setting