GE 51209 GE Wireless Motion-Sensing Alarm with Programmable Keypad - Manual (Page 10)

10
sounded to deactivate. NOTE: To test, a
cloth can be used to cover the alarm to
reduce risk of hearing damage.
Incorrect Code
If an incorrect code is entered the unit will
sound a louder beep and the indicator
light will flash red 3 times. Re-enter
correct code after indicator light stops
flashing.
OPERATING IN THE CHIME MODE
The chime is used to notify you when
motion is sensed in the area.
Slide switch to CHIME mode; the
chime will sound once.
Activating the Chime:
The chime will go off immediately
when motion is sensed. No code is
required. The motion sensor will retest
the area 1 seconds after chime
sounds. 1.
•