Jwin JDVD760 - Manual (Page 14)

Portable DVD Player with 7” Active Matrix TFT LCD V11M11_IM_EN_05302008
- 12 - www.jWIN.com
GETTING STARTED
Connecting the Player to a TV or Amplifier
When connecting the JD-VD760 to other devices, it is recommended that a multi-system
television is used. Before connecting this unit to a TV or amplifier, make certain that all devices,
including the JD-VD760 are switched off, all AC cords are disconnected from wall outlets, and
that ventilation holes are not blocked.
•
Observe the color coding of all audio and video cables, matching them with the output
jacks on all connected devices.
Once the JD-VD760 and all other appliances are securely connected, plug all units into AC wall
outlets and switch the power on.
After connection is firmed and securely done, plug AC ADAPTER to an applicable wall outlet
and turn on the player.
S-VIDEO OUTPUT CONNECTORS
The S (separate) video output connector separates the color (C) and luminance (Y) signals
before transmitting them to the TV set in order to achieve a sharper picture.
Use the S-video cable when connecting the player to a TV set equipped with an S-Video input
connector for the best picture clarity possible.
TV Set
AV Cable
Coaxial Digital
Audio Cable
Decoder or Amplifier
(sold separately)
JD-VD760
S-video cable
(optional)