Jwin JDVD760 - Manual (Page 15)

Portable DVD Player with 7” Active Matrix TFT LCD V11M11_IM_EN_05302008
- 13 - www.jWIN.com
Warning: Always disconnect the car adapter when not in
use. Do not use the car adapter in 24V vehicles.
To cigarette lighter socket
GETTING STARTED
COAXIAL DIGITAL AUDIO OUTPUT
When a DVD recorded in Dolby Digital/DTS is played, Dolby digital/DTS bitstream is output
from the player's COAXIAL digital audio output connector. When the player is connected to a
Dolby Digital/DTS decoder , you can enjoy theater-like audio quality at your home. [A coaxial
audio cable (not included) is required when an optional Dolby digital/DTS decoder is used.]
Connecting the Player to the Car Adapter
The included 9V car (cigarette lighter) adapter is designed for use in vehicles with a 12V
negative grounded electrical system (most current automobile models).
• Use only with 9V car adapter. Use of a higher-powered adapter, may
cause damage to this unit.
• Do not use other equipment with the JD-VD760.
• Make sure the cigarette lighter socket is cleaned before use.
• After use, disconnect the 9V car (cigarette lighter) adapter from both the
JD-VD760 and the cigarette lighter socket.
Turning on the Unit
To turn on the JD-VD-760, slide the POWER switch on the side of the unit to ON or press the
POWER button on the remote control. (If connected to an amplifier or TV set, turn the
connected device ON)