Synchronized recording of 3- cd changer playback, 20 englis h, Mix balance standby phones level max min – JVC XL-R5000BK User Manual

Page 25

Advertising

Englis

To add track marks manually

In the procedure above, set the automatic track setting to

“AUTO TR OFF”.

During recording, press the SET button to apply a track mark.

Notes

•

Even if automatic track marking is turned off, automatic track
marking will be performed during synchronized one-button
recording. When this occurs, manual track marking is tempo-
rarily disabled.

•

Tracks must be at least four seconds in length. Pressing the SET
button less than four seconds after the previous track mark cre-
ates a new track mark once 4 seconds of recording has been per-
fomed.

Performing synchronized one-button recording of
a full CD

One button synchronized recording of CDs loaded in the 3-CD
changer.

Select and stop the CD to be recorded.

Example: When recording CD1
•

Only the selected CD is recorded.

Load a recordable CD-R or CD-RW and close
the tray.

Press the CD REC button to start recording.

•

After “DISC DUBBING” is displayed, CD play and CDR/CD-
RW recording start simultaneously. This is called synchro
recording. Recording starts from the first track of the CD.

•

When a CD is recorded, its digital signals are recorded in their
original form. A track mark is automatically placed where one
track changes to the next, and the track number also changes.

When recording is complete

After “STOP DUBBING” is displayed, operation stops automati-
cally. It also stops automatically when CD play finishes.

To check a track number during recording

Press DISPLAY button on the main unit (or DISPLAY/MENU on
the remote control).

To stop the recording at any time

Press the

7 (stop) button and “STOP DUBBING” flashes.

Notes

•

There is no need to adjust the recording level (for a digital
recording).

•

If the source CD being recorded from the 3-CD changer is itself
a digital copy, digital recording cannot be performed (see page
39 for more details.). When this occurs, the recording type will
switch automatically from digital to analog.

•

This type of recording is not possible while a CD is playing.

•

When the CD REC button is pressed, the function is automati-
cally switched to CD. This means that when the CD to be
recorded has been selected, recording can proceed straightaway.

•

Upon completion of recording, “STOP DUBBING” flashes.
Always wait for “STOP DUBBING” to be cleared before pro-
ceeding with the next operation.

Performing synchronized one-button recording of
a single track

Select a disc and start playback.

Example: When planning to record a track on CD1

Synchronized Recording of 3-
CD Changer Playback

MIX BALANCE

STANDBY

PHONES LEVEL

MAX

MIN

MULTI JOG

–

POWER

REC LEVEL

1 3

XL - R5000 CD/CDR MULTIPLE COMPACT DISC RECORDER

CD PLAYER

CD REC 1CD

SYNCHRO

HIGH SPEED AUTO TRACK

DIGITAL

CD-R

44.1kHz

REC

L
R

–

40 30 20 15 10

6 3 0

Remaining play time of
track being recorded

Remaining recording time on
CD-R or CD-RW

DISPLAY

CD number CD track number

CD-R or CD-RW
track number

Remote Control

Main Unit