JVC XL-R5000BK - Manual (Page 31)

26
Englis
h
1
Load a recordable CD-R or CD-RW in the CDR
disc tray.
2
Press the REC ¶ button on the main unit to put
the CDR in the record pause mode.
• The remaining recording time on the disc appears in the display.
3
Select two recording sources to be mixed and
recorded.
Example:
CD and LINE are selected
• Press the same button again to clear the selection.
• Select the CD and LINE buttons to mix and record a CD loaded
in the 3-CD changer with the line input signals from an external
source.
• Select the CD and MIC buttons to mix and record a CD loaded
in the 3-CD changer with the input of a microphone connected
to the MIC connector.
• Select the LINE and MIC buttons to mix and record the line
input signals from an external source with the input of a micro-
phone connected to the MIC connector.
• The lamps of the selected sources light.
• Since analog signals are recorded, both the REC LEVEL and
MIX BALANCE lamps light.
4
Play the two sources together and adjust the
recording level and mixing balance.
• Adjust the volume in such a way that the 0 dB display of the
level meter is not exceeded when the loudest sound is supplied.
• If the CD input is selected for mixed recording, the pitch con-
trols may be used to adjust the speed of CD playback for mixing
and recording purposes. (See page 15.)
• If the microphone level is set too high, you may experience a
loud howling sound from your speakers. If this occurs, turn
down the volume of the microphone by turning down the vol-
ume of the amp/receiver powering the speakers you are using to
monitor the sound.
• When you have finished adjusting the recording level and the
mix balance, set the sources back to the point where you want to
start recording at.
5
Start playback of the sources to be recorded.
• If the CD1 button is pressed when mixing with a CD and
recording the result, the tracks are recorded in the following
sequence:
CD1 = CD2 = CD3
6
Press the CDR CONTROL 3 button to start the
recording.
When recording is complete
Press the CDR CONTROL 7 (stop) button. The 3 indicator
flashes and operation stops.
Mixed Input Recording
MIX BALANCE
STANDBY
PHONES LEVEL
MAX MIN
MULTI JOG
+ –
POWER
REC LEVEL
5 62
1 4 3
4
XL - R5000 CD/CDR MULTIPLE COMPACT DISC RECORDER
CD LINE MIC
MIX BALANCE
CD
LINE LINE
MIC
REC LEVEL
MIN MAX
CD + LINE CD volume is reduced. Line input volume is
reduced.
CD + MIC CD volume is reduced. Mic input volume is
reduced.
LINE + MIC Line input volume is
reduced. Mic input volume is
reduced.
REC LEVEL
MIN MAX
MIX BALANCE
CD
LINE LINE
MIC
MIX BALANCE
CD
LINE LINE
MIC
XL-R5000.book Page 26 Wednesday, March 29, 2000 6:37 PM