Simple playback, Load a cassette, Find program start point – JVC HR-DD840U User Manual

Page 23: Start playback, Stop playback, Simple playback and recording

Advertising
background image

EN

23

SIMPLE PLAYBACK AND RECORDING

Simple

Playback

LOAD A CASSETTE

1

Make sure the window side is up, the rear label side is
facing you and the arrow on the front of the cassette is
pointing towards the VCR. Don’t apply too much
pressure when inserting.

● The VCR’s power comes on automatically.

● The counter is automatically reset to "0H 00M 00S".

● If the cassette's record safety tab has been removed,

playback begins automatically.

FIND PROGRAM START

POINT

2

If the tape is advanced past the start point, press REW
or turn the TIME SCAN SHUTTLE ring to the left. To go
forward, press FF or turn the TIME SCAN SHUTTLE ring
to the right.

START PLAYBACK

3

Press PLAY. "AUTO PICTURE" appears on screen
(

pg. 35).

STOP PLAYBACK

4

Press STOP or STOP/EJECT. Then press STOP/EJECT
to remove the cassette.

Full-Size VHS
T-30 (ST-30**)
T-60 (ST-60**)
T-90
T-120 (ST-120**)
T-160 (ST-160**)
ST-210**

Compact VHS*
TC-20 (ST-C20**)
TC-30 (ST-C30**)
TC-40 (ST-C40**)

* Compact VHS camcorder recordings can be played on

this video recorder. Simply place the recorded cassette
into a VHS Cassette Adapter and it can be used just like
any full-sized VHS cassette.

** This video recorder can record on regular VHS and

Super VHS cassettes. However, it will record and play
back regular VHS signals only. It is not possible to play
back Super VHS recordings.

Usable cassettes

Turn on the TV and select the VCR channel 3 or 4 (or AV
mode).

1

2

4

5

3

6

8

0

7

9

q

REW (Rewind)

FF (Fast-Forward)

STOP

PLAY

STOP/EJECT

PLAY

TIME SCAN SHUTTLE

Advertising