Recording features, Engage tv mode, Select channel for viewing – JVC HR-DD840U User Manual

Page 39: Reset counter to zero, Display elapsed time on screen

Advertising
background image

EN

39

1

2

4

5

3

6

8

0

7

9

Record One Program While

Watching Another

ENGAGE TV MODE

1

During recording...

● Press TV/VCR. The VCR's VCR indicator goes out. (If

you are using the RF connection (

pg. 6) to view

the output from your VCR, the TV broadcast being
recorded disappears.)

● If you are using the AV connection (

pg. 6), to view

the output from your VCR, change the TV's input
mode from AV to TV.

SELECT CHANNEL FOR

VIEWING

2

Use the TV’s channel selector to set the channel you
want to watch.

Recording

Features

Display Elapsed Recording

Time

RESET COUNTER TO ZERO

1

Before recording starts, press C.RESET. The counter
resets to zero and displays the exact elapsed time as the
tape runs.

DISPLAY ELAPSED TIME ON

SCREEN

2

During recording, press OSD at any time to see the
elapsed time. All indications corresponding to the
current status of the VCR are displayed for 5 seconds.
The counter display remains on the screen indicating the
elapsed time. Press OSD again to remove the display.

● Make sure "SUPERIMPOSE" is set to "ON" (

pg. 28).

● The indications are not be recorded.

C.RESET

OSD

TV/VCR

Advertising