JL Audio Stealthbox SB-GM-SLVCTR2/10W3v3/TN - Manual (Page 2)

Continued on Next Page
SB-GM-SLVCTR2/10W3v3_INSTR_SKU#011248 SB-GM-SLVCTR2/10W3v3_INSTR_SKU#011248
S T E P 7
Remove the plastic tray from vehicle.
S T E P 6
Grab a hold of the bottom cushion and pull forward.
Remove the bottom cushion from the vehicle.
S T E P 5
From the passenger’s side of the vehicle, look to the side of
the center seat back / storage bin.
Use an hex key to remove the black bolt that secures the
gray bracket to the center seat back / storage bin.
S T E P 4
From the driver’s side of the vehicle, look to the side of the
center seat back / storage bin.
Use an hex key to remove the black bolt that secures the
gray bracket to the center seat back / storage bin.
Page 2 • JL Audio, Inc 2007
S T E P 9
Remove the four front nuts that secure the seating to the
floor.
S T E P 1 1
Slide the rear of the Stealthbox® into the mounting area first,
then drop the front of the Stealthbox® into place.
S T E P 1 0
Run speaker wire from the amplifier location to the
Stealthbox® location.
S T E P 8
Remove the four rear bolts that secure the seating to the
floor.