JVC RM-C1450 - Manual (Page 40)

40
Quick Start-up allows you to lessen the time for the TV to turn on and ready for viewing.
Press the M ENU button
π† To "Initial Setup"
è To enter
π† To "Quick Start-up"
è To turn "On" or "Off"
Press the M ENU button when finished
Note:
• Standby power consumption is higher when you have
this feature turned on.
BACK Back MENU Exit Select Operate
Initial Setup 2/2
Auto Shut Off
Software Version
Power Indicator
Optical Out
Quick Start-up
Off
High
PCM
Off
Quick Start-up
Initial Setup
Manufactured under license from Dolby Laboratories. "Dolby", and
the double-D symbol are trademarks of Dolby Laboratories.
You can select the optical digital sound output, either PCM or DOLBY DIGITAL when your TV
is connected to an amplifier that has DOLBY DIGITAL decoder. If you select DOLBY DIGITAL,
you can enjoy listening in 5.1ch sound when watching digital broadcasts. This only effects
digital channels.
Press the M ENU button
π† To "Initial Setup"
è To enter
π† To "Optical Out"
è To select "PCM" or "DOLBY DIGITAL"
Press the M ENU button when finished
Notes:
• If your amplifier does not have DOLBY DIGITAL decoder, select PCM. If you don't select
PCM, it cannot output the sound from the speakers.
• For connecting an amplifier using the optical output, see page 20.
• You cannot output sound from your Optical Output connection if the audio source is from your
HDMI device.
Optical Out
BACK Back MENU Exit Select Operate
Initial Setup 2/2
Auto Shut Off
Software Version
Power Indicator
Optical Out
Quick Start-up
Off
High
PCM
Off
LCT2275-001B-A English.indd 40 LCT2275-001B-A English.indd 40 6/14/07 10:34:17 AM 6/14/07 10:34:17 AM