JVC RM-C1450 - Manual (Page 73)

73
No Program or Weak Signal
This OSD appears when the digital channel that you have selected is too weak to receive or no
signal is being detected for that channel. It also appears when Noise Muting is On and no signal
is being received from an external source.
Weak Signal
This OSD appears when the selected channel is not broadcasting any picture or sound, or is
only broadcasting data information.
Audio / Data Only Channel
OSD Information
Audio / Data Only Channel
LCT2275-001B-A English.indd 73 LCT2275-001B-A English.indd 73 6/14/07 10:36:50 AM 6/14/07 10:36:50 AM