Activate high-speed search, Override automatic tracking, Adjust tracking manually – JVC HR-E249E User Manual
Page 14: Return to automatic tracking, Playback (cont.), High-speed (turbo) search, Manual tracking
14
EN
High-Speed (Turbo) Search
ACTIVATE HIGH-SPEED
SEARCH
1
During playback or still, turn the SHUTTLE ring all the
way to the right for forward high-speed search, or to
the left for reverse high-speed search. Releasing
SHUTTLE resumes still picture playback.
● For forward high-speed search, turn the SHUTTLE
ring all the way to the right and release it within 1
second.
● For reverse high-speed search, turn the SHUTTLE ring
all the way to the left and release it within 1 second.
OR
Press FF for forward high-speed search, or REW for
reverse high-speed search.
To resume normal playback, press PLAY.
NOTES:
●
For short searches, press and hold FF or REW for over 2
seconds. When released, normal playback resumes.
●
In the search, still, or frame by frame playback mode, the
picture may be distorted, and there may be a loss of colour.
Manual Tracking
Your video recorder is equipped with automatic tracking
control. During playback, you can override this and adjust the
tracking manually by pressing the TV PROG. buttons.
OVERRIDE AUTOMATIC
TRACKING
1
Press
on the remote to engage manual tracking.
ADJUST TRACKING
MANUALLY
2
Press TV PROG. + or – to adjust tracking.
RETURN TO AUTOMATIC
TRACKING
3
Press
on the remote to re-engage automatic
tracking.
NOTE:
When a new tape is inserted, the recorder enters the automatic
tracking mode automatically.
5
/
8
¡
1
q
6
1
2
4
5
3
6
8
0
7
9
2
4
1
3
REW
FF
TV PROG.
PLAYBACK (cont.)
PLAY
PAUSE
STOP
SHUTTLE
PLAY
PAUSE
TV PROG.
3R PICTURE
STOP
REW
FF
3R PICTURE indicator