JVC HR-E249E - Manual (Page 18)

18
EN
TV signals being received by the recorder’s built-in tuner can be
recorded onto a video tape. You can “capture” a TV programme
using your video recorder.
RECORDING
Basic
Recording
1 2
4 5
3
6
8
0
7 9
2
4
1
3
5 / 8
¡ 1 q
6
TV PROG.
PAUSE
NUMBER
STOP
PLAY
Turn on the TV and select the VIDEO channel (or AV mode).
LOAD A CASSETTE
1
Insert a cassette with the record safety tab intact.
● The counter is reset to 0:00:00 and the recorder
power comes on automatically.
CHOOSE A PROGRAMME
2
Press TV PROG. +/– or the NUMBER keys to select the
channel you wish to record.
● The TV PROG. dial can also be used to select a channel.
START RECORDING
3
Press and hold RECORD and PLAY on the remote
control, or press RECORD on the recorder.
PAUSE/RESUME
RECORDING
4
Press PAUSE. Press PLAY to resume recording.
STOP RECORDING
5
Press STOP on the remote control or STOP/EJECT on
the recorder. Then press STOP/EJECT to remove the
cassette.
B.E.S.T. takes place at the beginning of the first
recording after inserting the cassette (
੬
pg. 20).
● To prevent accidental recording on a recorded cassette,
remove its safety tab. To record on it later, cover the hole
with adhesive tape.
Record safety tab
Accidental erasure prevention
TV PROG.
TV PROG.
RECORD
PAUSE
PLAY
STOP/EJECT
RECORD