JVC HR-E249E - Manual (Page 5)

EN
5
SELECT LANGUAGE
3
Press OK. the Language Set display appears on the front
display panel and/or on the screen.
If you are referring to the front display panel
Press PUSH JOG %fi to select your language code
referring to the chart in the left column.
If you are referring to
the on-screen display
Press PUSH JOG %fi to
move the highlight bar
(pointer) to the language of
your choice.
PERFORM AUTO SET UP
4
Press OK.
"Auto" appears on the display panel and blinks; do
NOT press any button on the recorder or remote
control until the display panel shows the current
time or "CH1" or "--:--". (Refer to box on lower left
of page.)
● Auto channel set function takes place first; it assigns
automatically all receivable stations in your area.
● Auto clock set function sets the clock automatically
by reading the clock setting data from a station
transmitting a PDC signal while auto channel set is
being performed.
● During auto channel set, the recorder recognizes each
station name of the detected stations and stores them
in the recorder's memory, then automatically sets
S
HOW V IEW assigned Guide Program number for those
stations according to the broadcast area.
NOTE:
In the area where no TV station transmits a PDC signal,
the recorder can perform neither auto clock set nor
auto Guide Program number set.
● When auto channel set has
been completed success-
fully but auto clock set has
not, "CH" will be displayed.
● When neither auto
channel set nor auto clock
set has been completed
successfully, "--:--" will be
displayed.
● When both auto channel
set and auto clock set have
been completed success-
fully the correct current
time will be displayed.
● If Auto Set Up is completed, go to page 6.
1
3 OK
PUSH JOG
NOTES:
● If you are using the on-
screen display, the AUTO
SET screen will appear after
pressing OK in step 4. As
Auto Set Up progresses, the
" " mark on the screen
moves from left to right.
● If there is a power cut, or if
you press
or MENU
while Auto Set Up is in
progress, Auto Set Up will
be interrupted; be sure to
turn off the recorder power once and try again from step 1.
AUTO SET
PLEASE WAIT
[MENU] : EXIT
0 + + +
Beginning End
Auto Set Up results appear on the front
display panel
(Ex.) DEUTSCH is selected for SUISSE
(Ex.) DEUTSCH is selected
DANSK
SUOMI
NORSK
SVENSKA
NEDERLANDS
CASTELLANO
ITALIANO
FRANCAIS
DEUTSCH
ENGLISH
[ 5∞] =
[MENU] : ENDE
International telephone
country code Language code
Language Code
ENGLISH
: 01 NEDERLANDS : 06
DEUTSCH : 02 SVENSKA : 07
FRANCAIS : 03 NORSK : 08
ITALIANO : 04 SUOMI : 09
CASTELLANO : 05 DANSK : 10