JVC GET0576-001A - Manual (Page 134)

ENGLISH
16 SETTINGS & REFERENCES
Basic operations
Turning on the power
• By pressing SRC button on the unit, you can also turn
on the power. If the source is ready, playback also
starts.
Turning off the power
• If you turn off the power while listening to a track,
playback will start from where it had been stopped
previously next time you turn on the power.
General
• If you change the source while listening to a disc,
playback stops.
Next time you select “CD” as the playback source,
playback will start from where it had been stopped
previously.
• If no operation is done for about 30 seconds after
pressing MENU button, the operation will be
canceled.
Tuner operations
Storing stations in memory
• During SSM search...
– All previously stored stations are erased and the
stations are stored anew.
– When SSM is over, the station stored in the lowest
preset number will be automatically tuned in.
• When storing a station manually, the previously
preset station is erased when a new station is stored
in the same preset number.
Disc operations
Caution for DualDisc playback
• The Non-DVD side of a “DualDisc” does not comply
with the “Compact Disc Digital Audio” standard.
Therefore, the use of Non-DVD side of a DualDisc on
this product may not be recommended.
General
• This unit has been designed to reproduce
CDs/CD Texts, and CD-Rs (Recordable)/CD-RWs
(Rewritable) in audio CD (CD-DA), MP3/WMA
formats.
• When a disc is inserted upside down, “PLEASE” and
“EJECT” appear alternately on the display. Press 0 to
eject the disc.
• MP3 and WMA “tracks” (words “file” and “track” are
used interchangeably) are recorded in “folders.”
• While fast-forwarding or reversing on an MP3 or
WMA disc, you can only hear intermittent sounds.
More about this unit
Category Menu items Selectable settings, [reference page]
SRC SELECT
AM * 8
AM station
• AM OFF
• AM ON : Disable “AM” in source selection.
: Enable “AM” in source selection, [4].
AUX IN * 9
Auxiliary input
• AUX OFF
• AUX ON : Disable “AUX IN” in source selection.
: Enable “AUX IN” in source selection, [4].
* 8 Displayed only when any source other than “AM” is selected.
* 9 Displayed only when any source other than “AUX IN” is selected.
EN16-23_KD-R506_001A_f.indd 16 EN16-23_KD-R506_001A_f.indd 16 9/10/08 4:19:00 PM 9/10/08 4:19:00 PM