JVC GET0576-001A - Manual (Page 3)

ENGLISH
3
How to reset your unit
• Your preset adjustments will also be erased.
How to forcibly eject a disc
• You can forcibly eject the loaded disc even if the disc is
locked. To lock/unlock the disc, see page 9.
• Be careful not to drop the disc when it ejects.
• If this does not work, reset your unit.
CONTENTS
Detaching the control panel ......................... 3
Attaching the control panel ......................... 3
How to reset your unit ................................. 3
How to forcibly eject a disc ........................... 3
OPERATIONS
Basic operations ........................................... 4
• Using the control panel ............................... 4
• Using the remote controller (RM-RK50) ...... 6
Preparation .................................................. 7
Listening to the radio ................................... 8
Disc operations ............................................. 9
Listening to the USB device .......................... 10
EXTERNAL DEVICES
Listening to the other external
components .............................................. 11
SETTINGS
Selecting a preset sound mode .................... 12
Title assignment .......................................... 13
Menu operations .......................................... 14
Color settings ............................................... 17
REFERENCES
More about this unit .................................... 18
Troubleshooting ........................................... 21
Maintenance ................................................ 23
Specifications ............................................... 24
Detaching the control panel
Attaching the control panel
Caution on volume setting:
Digital devices (CD/USB) produce very little noise
compared with other sources. Lower the volume before
playing these digital sources to avoid damaging the
speakers by sudden increase of the output level.
This mark is used to indicate...
Turn the control dial to make a
selection, then press to confirm the
selection.
EN02-09_KD-R400[J]_f.indd 3 EN02-09_KD-R400[J]_f.indd 3 14/10/08 2:33:01 PM 14/10/08 2:33:01 PM