JVC GET0576-001A - Manual (Page 69)

ENGLISH
7 OPERATIONS
Listening to the radio
1 Select “FM,” “AM,” or “FM-LO.”
2 Search for a station to listen—Auto Search.
When a station is tuned in, searching stops. To stop searching, press the same
button again.
• You can also search for a station manually—Manual Search. Hold either one of
the buttons until “M” flashes on the display, then press it repeatedly.
• When receiving an FM stereo broadcast with sufficient signal strength, the ST
indicator lights up on the display.
Note:
FM:
87.5 MHz – 108.0 MHz
FM-LO: 65.00 MHz – 74.00 MHz
Improving the FM reception
When an FM stereo broadcast is hard to receive,
activate monaural mode for better reception.
• See also page 16.
Reception improves, but stereo effect will be lost.
• The MO indicator lights up on the display.
To restore the stereo effect, repeat the same
procedure to select “
MONO OFF.” The MO indicator
goes off.
Storing stations in memory
Automatic presetting (FM/FM-LO)—
SSM (Strong-station Sequential Memory)
You can preset up to 12 stations for FM, and 6 stations
for FM-LO.
1
While listening to a station...
2
Select the preset number range you want to
store.
FM:
SSM 01–06, SSM 07–12
FM-LO:
SSM 01–06
3
Local FM stations with the strongest signals are
searched and stored automatically.
• To stop searching, press
4 / ¢ .
To preset other 6 stations, repeat from step 1 again.
[Turn] = [Press]
Continued on the next page
EN02-09_KD-R407[EE]f.indd 7 EN02-09_KD-R407[EE]f.indd 7 10/8/08 5:56:00 PM 10/8/08 5:56:00 PM