JVC KD-AR880J - Manual (Page 14)

ENGLISH
14 OPERATIONS & EXTERNAL DEVICES
Using the Bluetooth ®
devices
For Bluetooth operations, it is required to connect the
Bluetooth Adapter (KS-BTA200) to the CD changer
jack on the rear of this unit. See also page 42.
• Refer also to the instructions supplied with the
Bluetooth adapter and the Bluetooth device.
• Refer to the list (included in the box) to see the
countries where you may use the Bluetooth®
function.
To use a Bluetooth device through the unit (“Bluetooth
Phone” and “Bluetooth Audio”) for the first time,
you need to establish Bluetooth wireless connection
between the unit and the device.
• Once the connection is established, it is registered in
the unit even if you reset your unit. Up to five devices
can be registered in total.
• Only one device can be connected at a time for each
source (“Bluetooth Phone” and “Bluetooth Audio”).
Registering a Bluetooth device
Registration (Pairing) methods
Use either of the following items in the Bluetooth menu
to register and establish the connection with a device.
• Select “Bluetooth Phone” or “Bluetooth Audio” as the
source to operate the Bluetooth menu.
Open Make the unit ready to establish a new
Bluetooth connection.
Connection is established by operating the
Bluetooth device.
Search Make the unit ready to establish a new
Bluetooth connection.
Connection is established by operating
the unit.
If a USB device has been attached...
Playback starts from where it has
been stopped previously.
• If a different USB device is
currently attached, playback
starts from the beginning.
Change the display information and pattern
To stop play and detach the USB device
Straightly pull it out from the USB input terminal.
• Press SRC to listen to another playback source.
Cautions:
• Avoid using the USB device if it might hinder your
safety driving.
• Do not pull out and attach the USB device
repeatedly while “File Check” is flashing on the
display.
• Do not start the car engine if a USB device is
connected.
• Stop play back before disconnecting a USB device.
• This unit may not be able to play the files
depending on the type of USB device.
• You cannot connect a computer to the USB input
terminal of the unit.
• Make sure all important data has been backed up
to avoid losing the data.
• Do not leave a USB device in the car, expose to
direct sunlight, or high temperature to avoid
deformation or cause damages to the device.
You can operate the USB device in the same way you
operate the files on a disc. (See pages 12 and 13.)
• You can listen to WAV files by following the MP3/
WMA/AAC files operations listed on pages 12 and 13.
EN08-17_KD-AR880_G830[J]2.indd 14 EN08-17_KD-AR880_G830[J]2.indd 14 2/13/07 11:12:42 AM 2/13/07 11:12:42 AM