JVC KD-AR880J - Manual (Page 34)

ENGLISH
34
3
Adjust the dimmer time.
1 Turn the control dial to set the dimmer time.
2 Press ¢ to select “To.” Then, turn the
control dial to set the dimmer end time.
4
Exit from the setting.
Changing the display color
You can select your favorite display color for each source
(or all sources).
• When
appears on the display, you can move
back to the previous display by pressing number
button 3.
Setting the display color
1
Follow steps 1 to 3 on page 31.
• In step 2, select “COLOR.”
• In step 3, select “Color Sel.”
Setting the time for dimmer
• When appears on the display, you can move
back to the previous display by pressing number
button 3.
1
Follow steps 1 to 3 on page 31.
• In step 2, select “DISPLAY.”
• In step 3, select “Dimmer.”
2
Select “Time Set.”
Category Indication Item
( : Initial) Setting, [reference page]
AUDIO
Amp Gain
Amplifier gain
control • High PWR
• Low PWR
• Off * 9
: Volume 00 – Volume 50
: Volume 00 – Volume 30 (Select if the maximum power of
each speaker is less than 50 W to prevent damaging the
speaker.)
: Deactivates the built-in amplifier.
COLOR
Color Sel
Color selection Initial: All
Source : Select your favorite display color for each source (or for all
sources), [34].
Color Set
Color setting
Red
Green
Blue
—
Day Color
NightColor
00 – 11
00 – 11
00 – 11
: Create your own colors, and select them for the display
color, [35].
: User color during the day time * 10 .
: User color during the night time * 10 .
: Initial: Day Color: +07, NightColor: +05
: Initial: Day Color: +07, NightColor: +05
: Initial: Day Color: +07, NightColor: +05
* 9 Only for KD-AR880.
* 10 Depends on the “Dimmer” setting.
EN28-37_KD-AR880_G830[J]1.indd 34 EN28-37_KD-AR880_G830[J]1.indd 34 2/6/07 6:01:21 PM 2/6/07 6:01:21 PM