JVC KD-AR880J - Manual (Page 22)

ENGLISH
22
Listening to the satellite radio
Before operating, connect either one of the following
(separately purchased) to the CD changer jack on the
rear of this unit. See also page 42.
• JVC SIRIUS radio DLP—Down Link Processor, for
listening to the SIRIUS Satellite radio.
• XMDirect ™ Universal Tuner Box—Using a JVC
Smart Digital Adapter (XMDJVC100: not supplied), for
listening to the XM Satellite radio.
• Refer also to the Instructions supplied with your
SIRIUS Satellite radio or XM Satellite radio.
GCI (Global Control Information) update
• If channels are updated after subscription, updating
starts automatically.
The following appears and no sound can be heard:
– For SIRIUS Satellite radio: ”Channels Updating
XX%* Completed”
– For XM Satellite radio: “UPDATING”
• Update takes a few minutes to complete.
• During update, you cannot operate your satellite
radio.
* Changes every 20% of update is completion (ex. 20%,
40%, 60%)
Activate your SIRIUS subscription after
connection
1
2
JVC DLP starts updating all the SIRIUS channels.
Once completed, JVC DLP tunes in to the preset
channel, CH184.
3 Check your SIRIUS ID, see page 33.
4 Contact SIRIUS on the internet at
<http://activate.siriusradio.com/> to
activate your subscription, or you can call
SIRIUS toll-free at 1-888-539-SIRIUS (7474).
“Subscription Updated Press Any Key to Continue”
appears on the display once subscription has been
completed.
Activate your XM subscription after connection
• Only Channel 0, 1, and 247 are available before
activation.
1
2
XMDirect ™ Universal Tuner Box starts updating
all the XM channels. “Channel 1” is tuned in
automatically.
3 Check your XM Satellite radio ID labelled on
the casing of the XMDirect ™ Universal Tuner
Box, or tune in to “Channel 0” (see page 23).
4 Contact XM Satellite radio on the internet
at <http://xmradio.com/activation/> to
activate your subscription, or you can call
1-800-XM-RADIO (1-800-967-2346).
Once completed, the unit tunes in to one of the
available channels (Channel 4 or higher).
EN18-27_KD-AR880_G830[J]1.indd 22 EN18-27_KD-AR880_G830[J]1.indd 22 2/6/07 2:06:11 PM 2/6/07 2:06:11 PM