JVC KD-AR880J - Manual (Page 36)

ENGLISH
36
Setting menu ( : Initial)
Auto Connect
When the unit is turned on, the connection is
established automatically with....
Off:
No Bluetooth device.
Last: The last connected Bluetooth device.
Order: The available registered Bluetooth device
found at first.
Auto Answer
Only for the device being connected for “Bluetooth
Phone.”
Off:
The unit does not answer the calls
automatically. Answer the calls manually.
On: The unit answers the incoming calls
automatically.
Reject: The unit rejects all incoming calls.
Message Info
Only for the device being connected for “Bluetooth
Phone.”
Auto:
The unit informs you of the arrival of a
message by ringing and displaying “MSG.”
Manual: The unit does not inform you of the arrival of
a message.
MIC setting
Only for the device being connected for “Bluetooth
Phone.”
Adjust the microphone volume, [Level 01/02/03].
Version
The Bluetooth software and hardware versions are
shown.
You can change the settings listed on the right column
according to your preference.
1
Select “Bluetooth Phone” or
“Bluetooth Audio.”
2
Enter the Bluetooth menu.
3
Select “Setting.”
4
Select a setting item.
* 1 Appears only when a Bluetooth phone is
connected.
* 2 Appears only when a Bluetooth phone is
connected and it is compatible with text
message.
* 3 Bluetooth Audio: Shows only “Version.”
5
Change the setting accordingly.
Bluetooth settings
EN28-37_KD-AR880_G830[J]1.indd 36 EN28-37_KD-AR880_G830[J]1.indd 36 2/7/07 11:09:17 AM 2/7/07 11:09:17 AM