JVC PC Connection Kit - Manual (Page 37)

EN
37
1 P.AE/Effect buttons
• Selects one of the 5 P.AE/Effects
available per programmed scene.
• To cancel the selected effect, click the
EC (Effect Clear) button.
2 Fade/Wipe Effect buttons
• Selects one of the 7 Picture Wipes or 10
Fades/Wipes available per scene
transition.
• To cancel the selected effect, click the
TC (Transition Clear) button.
3 Elapsed Time
• Displays the total elapsed time of all the
programmed scenes.
4 Button for Opening the Controller
Window
• Displays the controller.
• Can be displayed even when selecting
the menu Window — Controller.
5 Program list
• Displays the following setting
information beginning from the left:
Scene number, In point, P.AE/Effect, Out
point, Fade/Wipe Effect, Duration Time
Counter, and Memo.
• Up to 99 programs can be set per file for
scenes specified by an In and Out point.
6 ID number
• Displays the video source unit’s ID
number.
• An ID number can be clicked to display
the JLIP Devices dialog box as well as
when switching the serial port or
performing JLIP devices scanning.
7 Edit Indicator
• In Normal mode, the deck being
operated is displayed in green.
• In Edit mode, both deck indicators light
(Player: Green, Recorder: Red) and an
arrow also lights.
• The recorder lights red between the In
point and Out point while the recorder
is actually recording.
• Clicking on either deck selects the one
to be operated.
8 Tape counter display
• Displays the current tape position.
ex.
00: 01: 45: 10
(Hours : Minutes : Seconds : Frames)
• The digital camera’s counter uses a
drop-frame system.
9 Close button
• Close the controller window.
0 Edit buttons
A. Edit Standby button
• The player is put into Pause mode for
the Syncro Edit pre-roll time already set
on the Options dialog box (see
page 52).
• This button is used when VCRs not
compatible with this editing system and
performing manual editing.
• This button cannot be clicked when the
counter reads less than 00:00:30:00.
• This button cannot be clicked when the
player is not paused.
B. Syncro Edit button
• After going into Playback-Pause mode at
the In point of the recorder and player,
clicking this button rewinds both decks
by the pre-roll amount and executes the
first event.
• Since no Out point is specified, the
Syncro Edit is stopped using Stop.
• This button cannot be clicked when the
counter reads less than 00:00:30:00.
• This button cannot be clicked when the
player is not paused.
C. Select Player/Recorder button
• Selects the deck to be operated. The
player is forcibly selected when no
recorder is connected to the JLIP.
• This button cannot be clicked when
there is no JLIP recording equipment.
A B C