JVC PC Connection Kit - Manual (Page 38)

38
EN
! Jog/Shuttle
Jog Dial Lamp (Inner lamp)/Jog Dial
• Jog Dial mode is selected when the jog
dial lamp is lit by clicking with the
mouse.
• It is possible to advance frames by
clicking with the mouse on the left
(reverse) or right (forward) arrows.
• The deck can be operated at this time
using the number keys.
Shuttle Lamp (Outer ring)/Shuttle Ring
• Shuttle mode is selected when the
shuttle dial lamp is lit by clicking with
the mouse.
• Slow Playback, Playback, and Fast
Forward Playback depending on the left
(reverse) or right (forward) arrows that
are clicked.
• The deck can be operated at this time
using the number keys.
PC's Ten-key assignments for Jog/Shuttle
<Jog Mode>
[2]: Playback
[4]: Frame reverse
[6]: Frame advance
[8]: Jog/Shuttle Select & Pause
[•]: Stop
<Shuttle Mode>
[2]: Playback
[4]: Accelerates one level in the rewind
direction, or decelerates one level in
the fast forward direction.
[6]: Accelerates one level in the fast
forward direction, or decelerates one
level in the rewind direction.
[8]: Jog/Shuttle Select & Pause
[•]: Stop
Jog/Shuttle Operation buttons
Click these buttons to perform Jog/Shuttle
operations.
Jog Dial Select button
Jog Dial mode is
selected when the
inner ring is lit.
Shuttle Dial Select button
Shuttle Dial mode is selected when the outer
ring is lit.
JLIP VIDEO PRODUCER WINDOW BUTTONS AND DISPLAYS (cont.)
@ Tape Operation buttons
• These buttons operate the video camera
and recorder.
• For slow playback, click Pause and then
Slow.
• For frame advance playback, click
Pause and then Frame Advance.
• A lock lid is attached to the Record
button. This lid must be clicked to open
before using it.
A. Recording button
B. Reverse Frame Advance button
C. Pause button
D. Forward Frame Advance button
E. Forward Slow button
F. Stop button
G. Fast Forward/Fast Forward Search
button
H. Playback button
I. Rewind/Rewind Search button
J. Eject button
K. Reverse Slow button
# Review button
• This button operates the recorder to
playback video after editing. Only one
event is played back when using Syncro
Edit, while all programs are played back
when Auto Edit has been executed.
• This button does not function when the
recorder is not connected to the JLIP.
• This button cannot be clicked when not
even one Auto Edit has been executed
since startup.
A
J
K
F G H I
B C D E