JVC PC Connection Kit - Manual (Page 39)

EN
39
$ Preview button
• Playback the video from the In point to
Out point specified for a program.
• Recording does not result from clicking
this button.
• The PC emits a sound when the
application is started and exited.
• When using a camera that includes
transition functions such as wipe, the
area before the In point and after Out
point appears masked. This allows
accurate confirmation of the video
location to be edited. (This operation is
not possible with some models.)
• This button cannot be clicked when
several scenes are selected.
% Goto button
• Clicking this button causes the deck to
automatically locate the time code
specified in the program list (In point)
and puts the deck in Playback-Pause
mode.
• Only the player can be operated.
^ Auto Edit button
• Playback all scenes in order of Scene
number.
• Since a lock lid is usually attached, click
this button only after opening the lid by
clicking.
• Editing automatically starts once the
recorder is connected and put into
Pause mode.
& Program Modification button
When making fine modifications to a
program, the In point and Out point are
specified using this button after the Scene
number is specified using the Program Select
buttons. Various fine modifications are made
with Trim+/–.
A. In Point button
• This button selects the time code for the
In point and displays it in red.
• Fine modification of the time code
for the In point can be done using
Trim+/–.
• Clicking Goto after this button causes
the deck to automatically locate the In
point and puts the deck in Playback-
Pause mode.
• This button cannot be clicked when
several scenes have been selected.
B. Out Point button
• This button selects the time code for the
Out point and displays it in red.
• Fine modification of the time code for
the Out point can be done using
Trim+/–.
• This button cannot be clicked when
several scenes have been selected.
C. Trim buttons
These buttons are used to make fine
modifications to the time code of the In
point and Out point specified for the
program.
Trim+: Increases time data by one frame.
Trim–: Decreases time data by one frame.
• This button cannot be clicked when an
In point or Out point is not selected.
D. Modify Edit Points button
This button is used when making fine
modifications to the scene in the program
list currently selected.
• It is also possible to open the Modify
Edit Points dialog box and make fine
modifications to In point, Out point,
tape change and memo.
• The Modify Edit Points dialog box can
also be opened by double clicking on
the Scene number.
• This button cannot be clicked when
several scenes have been selected.
A B C D