JVC AV 32DF74 - Manual (Page 29)

Initial Setup
29
Auto Tuner Setup
The auto tuner setup function is described on page 21 as the interactive plug-in menu. If you
need to run the auto tuner setup again, follow the steps below.
Press the M
ENU
button
π† To AUTO TUNER SETUP
è To operate
è To choose CABLE or AIR
Press the O
K
button to start
����������������
�����
������������������
������ ������� ����
����
����������
��
Programming will take approximately 1 to 2 minutes. The auto tuner is finished when the
message PROGRAMMING OVER! appears onscreen.
Channel Summary
Channel summary allows you to customize the line-up of channels received by your TV. You
can add or delete channels from the line-up or prevent any unauthorized viewers from watching
any or all 181 channels.
Press the M ENU button
π† To CHANNEL SUMMARY
è To operate
The Channel summary screen will now be displayed with
the channels set to scan marked with an “”. You can delete
channels from the scan by removing the “”. If any channels
were missed during auto tuner setup and you wish to add
them, you may by placing an “” next to the channel number.
π †
è To the SCAN column
Press the O
K
button to include or delete from scan
Press the M
ENU
button when finished
You can block access to a channel by activating the channel lock.
Press the M
ENU
button
π† To CHANNEL SUMMARY
è To operate
π †
è To the Lock Column ( )
Press the Z
ERO
button to lock or unlock that channel
Press the M
ENU
button when finished
���������������
��
��
��
��
��
�����
������ ������� ����
����
��
��
��
��
��
��
���� ����� ����
Press the Menu button when finished
AV-32\36DF74 English 6/4/03, 9:21 AM 29