JVC AV 32DF74 - Manual (Page 41)

Initial Setup
41
When you are using a surround system, you can substitute the speaker of this television for
the center speaker of you surround system. Set CENTER CH INPUT to on when you use the
speaker as the center speaker of your surround system.
Press the M
ENU
button
π† To CENTER CH INPUT
√® To adjust CENTER CH INPUT to “ON” or “OFF”
Press the M
ENU
button when finished
Note:
The normal speaker output is 20W 16Ohms. The maximum is
40W. If you exceed the maximum, your speaker may break.
Center CH Input
����������
����������
���������������
����������
�������������
������ ������� ����
����
���������
��������
��
���
���
������
The DIGITAL-IN option can only be displayed in the INITIAL SETUP menu when a 480p picture
signal is being input to the DIGITAL-IN terminal. This option adjusts the position when a 480p
picture signal is being displayed on the screen. There are two types of 480p picture signals:
640x480 and 720x480. If the displayed picture is slightly shifted, the position can be adjusted
by selecting either SIZE1 or SIZE2.
Press the M
ENU
button
π† To DIGITAL-IN
è To enter
è To select SIZE1 or SIZE2
Press the M
ENU
button to finish
Digital-In
����������
����������
���������������
����������
�������������
������ ������� ����
����
���������
��������
��
���
���
������
AV-32\36DF74 English 6/4/03, 9:21 AM 41