JVC AV 32DF74 - Manual (Page 40)

This feature is used if you have connected an AV Receiver to your television. By turning this
feature on, your television can automatically detect the signal source from your components
that are connected to your AV Receiver.
Press the M
ENU
button
π† To V1 SMART INPUT
è To turn ON or OFF
Press the MENU button when finished
Notes:
• If you do not have an AV Receiver connected to your
television, turn this feature OFF. By doing so, you can take
advantage of using AV CompuLink components with your television.
• Some AV Receivers may not work with this function.
Initial Setup
40
V1 Smart Input
If your TV is connected to a stereo system, you can turn off the TV speakers and listen to the
audio through your stereo.
Press the M
ENU
button
π† To TV SPEAKER
√® To turn the TV’s speakers ON or OFF
Press the MENU button when finished
Notes:
• Before you turn the TV speaker setting from OFF to ON,
make sure that the TV volume level is low! If the TV volume is set too high, the sound
level will be extremely loud.
• After a power interruption, the TV speaker settings will return to “ON”.
TV Speaker
����������
����������
���������������
���������� ��
���
���
������
�������������
������ ������� ����
����
���������
��������
If your television is connected to an external speaker source, audio out gives you the option of
controlling the volume level with your TV’s remote control.
Press the M
ENU
button
π† To AUDIO OUT
è To VARI or FIX
Press the M
ENU
button when finished
VARI: Lets you adjust the volume of the external speakers
using the V
OLUME
+/– buttons on your TV’s remote control.
FIX: The volume of the external speakers is adjusted using
the audio device’s remote control.
Audio Out
����������
����������
���������������
����������
�������������
������ ������� ����
����
���������
��������
��
���
���
������
������������
����������������
��������������
�������������
������ ������� ���� ����
���������
��������
��
���
���
AV-32\36DF74 English 6/4/03, 9:21 AM 40