JVC COMPACT GR-SXM735 - Manual (Page 29)

EN
29
NOTES:
● Some sample images have been stored in the built-in
memory at the factory. If you wish to delete them, first
remove the “Protecting Images” function (
੬
pg. 32),
then perform the “Deleting Images” function (
੬
pg.
33).
● If a Snapshot is taken while the camcorder is in the
WIDE mode (
੬
pg. 41), the Snapshot image is
recorded without the black bars at the top and bottom of
the screen.
● When you shoot in a dark environment, the still image
will become coarse and its true colors will be lost.
● During the D.S.C. recording, the Zooming (
੬
pg. 20),
Picture Stabilizer (
੬
pg. 20) and Video Light
(
੬
pg. 21) functions can be operated.
● Still images are taken in a format based on JPEG (Joint
Photographic Experts Group).
● When you use the LCD monitor outdoors under direct
sunlight, the LCD monitor may be difficult to see. If this
happens, close the LCD monitor and use the viewfinder
instead.
● To store the still images you shot, we recommend that
you transfer them to a computer and save them on disk
(
੬
pg. 34), or transfer them to a VCR connected to the
camcorder and record them onto a tape.
● Image data stored in the camcorder’s built-in memory
can be transferred to a Windows ® PC and saved using
the provided image transfer software, Picture Navigator
(
੬
pg. 34).
* There is a momentary camera shutter-type blackout
together with the image.
** Continuous camera shutter-type blackout takes place 4
or 9 times with the image, like serial photography, then
the 4 or 9 still images you took are displayed.
Quick Review (for still images stored
in the built-in memory):
To check the still
image most recently stored in the built-in memory.
1) Set the Power Switch to “
” or “ ”. If the DSC Lamp
is not lit, press REFRESH for approx. 1 second to select
“DSC”.
2) Press 2 and release quickly.
● The still image is displayed for approx. 3 seconds. The
message “DELETE OK? PRESS PLAY BUTTON”
appears.
To remove the still image you have checked
(Instant Delete) . . .
Press 4/6 while the message “DELETE OK? PRESS PLAY
BUTTON” is displayed.
DSC
F I NE 1 5
60 59 1 0
Pictrue mode display
Remaining number
of shots
(Blinking)
FULL*
(Snapshot mode with
no frame)
PIN-UP*
(Pin-Up mode)
MULTI-4**
(Multi-Analyzer 4)
MULTI-9**
(Multi-Analyzer 9)
D.S.C. mode indicator