JVC COMPACT GR-SXM735 - Manual (Page 30)

30
EN
Previous Page (2) Button
Next Page (3) Button
D.S.C. PLAYBACK
REFRESH Button
To move
the page
next
To move
the page
back
Power Switch
Display
MENU (BRIGHT)
Wheel
Display
Normal Playback
Still images shot using this camcoder are automatically
numbered, then stored in numerical order in the built-in
memory. You can view the still images stored in memory,
one at a time, much like flipping through a photo album.
1
Set the Power Switch to “ ”. The VIDEO Lamp
comes on. If the DSC Lamp is not lit, press REFRESH
for approx. 1 second to select “DSC”. A still image
stored in memory is displayed.
•When no still image is stored in memory, the screen
becomes blue.
2
Press 3 or 2 to select the still image you want to
view.
•Each time 2 is pressed, the page goes back, while
each time 3 is pressed, the page goes next.
•If there are no stored images, “NO IMAGES
STORED” is displayed.
NOTES:
● When the Power Switch is set to “ ” and the LCD
monitor is opened at an angle of 60 degrees or more, the
LCD monitor switches on and the viewfinder switches
off automatically to save power.
● The playback picture can be viewed in the viewfinder
(with the LCD monitor shut), on the LCD moitor or on a
connected TV (
੬
pg. 24).
● When viewing a playback picture on a connected TV, it
may jitter slightly.
● You can also view the playback picture on the LCD
monitor with it flipped over and retracted.
● To brighten the LCD monitor, rotate the BRIGHT Wheel
towards “+”. To darken the LCD monitor, rotate it
towards “–”.
● Even if you shoot a new picture after playing back a still
image with a low number, this will not overwrite the
existing picture because new pictures are automatically
stored after the still image most recently stored in
memory.
Slide Show
You can run through all the images stored in memory
automatically in numerical order.
1 Set the Power Switch to “ ”. If the DSC Lamp is
not lit, press REFRESH for approx. 1 second to select
“DSC”.
2 Press the MENU Wheel in. The Menu Screen
appears.
3 Rotate the MENU Wheel to select “SLIDE SHOW”
and press it. The Slide Show starts.
4
To stop the Slide Show, press the MENU Wheel in
twice.
I
S
P
D
ᮣ
N
L
R
E
R
D
I
O
L
E
E
D
T
E
T
X
E
E
T
U
C
E
R
S
T
N
M
H
E
O
N
W
U Menu Screen
Makes the DSC lamp come on.